Placing Callers On Hold; Connecting Two Or More Callers - Lucent Technologies DEFINITY Enterprise Communications Server Operation Manual

DEFINITY® Enterprise Communications Server Release 7
Console Operations 555-230-700
3 Operating the Console

Placing Callers on Hold

or
Exceptions:
Two conditions impact your ability to transfer callers to outside parties. You
cannot transfer calls to outside parties if:
All outside lines are busy.
The caller does not have calling privileges for the outside line requested.
Placing Callers on Hold
You can place up to 6 calls on hold. You should place callers on hold if you cannot
service them immediately, or if you need to get back to the caller with
information.
To place a call on hold:
1. Press the lighted call appearance button.
2. Greet the caller.
3. Press the H
To reenter a call that is on hold:
1. Press the call appearance button that is on hold.
2. Talk to the party.
A single-party call that is on hold returns to the console automatically when it has
been on hold for too long.

Connecting Two or More Callers

You can connect two or more parties with the attendant console. Connecting two
or more callers is usually used for conference calls or to connect callers who
cannot call each other.
— If the called party declines to talk to the caller, press the S
button to reconnect to the caller.
Follow your company's procedures for taking messages.
Press the R
ELEASE
If the called party is busy or does not answer, press the C
button to reconnect with the caller.
Follow your company's procedures for taking messages.
Press the R button.
ELEASE
button.
OLD
button.
Issue 4
June 1999
26
PLIT
ANCEL