Routine Maintenance; Testing The Console - Lucent Technologies DEFINITY Enterprise Communications Server Operation Manual

DEFINITY® Enterprise Communications Server Release 7
Console Operations 555-230-700
6

Routine Maintenance

Testing the Console

Routine Maintenance
Routine testing and cleaning for your console is quite simple. This chapter
provides step-by-step procedures for testing your console, describes cleaning
procedures, and discusses what you need to do in the case of a power outage.
Testing the Console
It is important for you to test your console's display and console lamps weekly. If
a problem occurs with the display or one of the lamps, notify your system
manager.
To test the display and the lamps on a 302A/B console:
1. Open the panel on the front of the console (see
2 on page
2. Press and hold the lamp test switch (located at the left front of the console).
The following should occur:
3. Release the Lamp Test switch.
4. Close the panel.
7).
All lamps in the display should light.
Each row of lamps on the console and the selector console should
light and go dark in sequence from top to bottom.
The timed-reminder tone (high-pitched, .5 second tone) sounds.
Lamps return to their former state.
The timed-reminder tone silences.
June 1999
6
Figure 1 on page 6 or
Issue 4
71
Figure