Selector Console - Lucent Technologies DEFINITY Enterprise Communications Server Operation Manual

DEFINITY® Enterprise Communications Server Release 7
Console Operations 555-230-700
2 Understanding the Console Layout
Physical Layout of Your Console
Figure 8. Ringer Volume Control Area (enhanced console)
The ringer volume control area has an
button. To adjust the volume on your console:
SELECT
1. Press and release the
display.
The display exhibits a bar graph and identifies the tone to be adjusted.
2. Press the
3. Press and release the
(down) button to decrease the volume.
4. Press any other button on the console to complete or cancel this task.

Selector Console

The Selector Console allows you to transfer calls and determine the status of an
extension. It has two groups of buttons and lamps: the Hundreds Group Select
(HGS) and the Direct Extension Selection (DXS) with Busy Lamp Field (BLF).
The basic console has 8 HGS buttons; the enhanced console has 20. You use them
in conjunction with the DXS buttons to dial an extension. For example, if you
wish to transfer a call to extension 3452, press the HGS button labeled 34, then
press the DXS button labeled 52.
The 100 DXS buttons are labeled from 00 to 99. When combined with the HGS
buttons, they provide up to 800 possible extensions for the basic console and up to
2000 possible extensions for the enhanced console. For more information on how
to transfer calls, refer to
(up) button) or
button to choose the type of tone that you wish to adjust.
SELECT
(up) button to increase the volume or the
''Transferring Calls to Internal Extensions'' on page
(up) button, a (down) button, and a
(down) button to activate the
Issue 4
June 1999
19
24.