Disposal Of The Machine; Ordering Numbers - Kemppi Master MLS 2500 Operation Instructions Manual

Power source overheat indicator light is lit.
Power source is overheated.
• Check that there is enough free space behind the machine for cooling air circulation.
• Check cooling unit for water circulation, clean cooling unit filter and air grate. Add cooling
liquid if necessary.
For further information and assistance, contact your nearest Kemppi service workshop.

4.3. DISPOSAL OF THE MACHINE

Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!

5. ORDERING NUMBERS

Master MLS™ 2500
Master MLS™ 2503
Welding cable 35mm², 2,5 m
Earth cable 25mm², 2,5 m
Electric plug 16 A, 5-poles
Master MLS™ 3500
Master MLS™ 3503
Welding cable 50mm², 2,5 m
Earth cable 50mm², 2,5 m
Electric plug 16 A, 5-poles
Mastertig MLS™ 3000
Mastertig MLS™ 3003
Torches
TTC 160 4m
TTC 160 8m
TTC 160 16m
TTC 220 4m
TTC 220 8m
TTC 220 16m
Earth cable 35mm², 5 m
Electric plug 16 A, 5-poles
Gas flow meter AR/clock
Mastertig MLS™ 4000
Mastertig MLS™ 4003
Torches
TTC 160 4m
TTC 160 8m
TTC 160 16m
© KEMPPI OY MASTER MLS™ 2500, 2503, 3500, 3503, MASTERTIG MLS™ 3000, 3003, 4000, 4003 / 0606– 19
6104250
6102250
6184301
6184311
9770812
6104350
6102350
6184501
6184511
9770812
6114300
6112300
627016004
627016008
627016016
627022004
627022008
627022016
6184311
9770812
6265136
6114400
6112400
627016004
627016008
627016016