Table of Contents
Advertisement
3.1
DAilY mAintenAnCe
The following maintenance opeations should be carried out daily:
• Check water level and input flow, add liquid if needed.
• Check cables and connections. Tighten, if necessary and replace defect
3.2
regulAr mAintenAnCe
Make sure that the machine receives regular and appropriate maintenance.
Authorised Kemppi service agents perform regular maintenance by
agreement. For more information on regular maintenance, contact a Kemppi
representative.
3.2.1 every sixth months
The following maintenance opeations should be carried out at least every
sixth months:
• Clean off dust and dirt. Change the cooling liquid and wash up the pipes
• Check seals, cables and connections. Tighten, if necessary and replace
3.2.2 maintenance by agreement
Authorised Kemppi service agents perform regular maintenance by
agreement. During the maintenance the machine is cleaned and checked
for faults. The functionality of all parts is tested and the possible faults are
repaired.
3.3
DispOsAl OF the mAChine
Do not dispose of electrical equipment with normal waste!
EN
In observance of European Directive 2002/96/EC on waste electrical
and electronic equipment, and its implementation in accordance with
national law, electrical equipment that has reached the end of its life must
be collected separately and taken to an appropriate environmentally
responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit
to a regional collection centre, per the instructions of local authorities
or a Kemppi representative. By applying this European Directive you will
improve the environment and human health.
10
parts
and water reservoir with pure water.
defect parts.
Advertisement
Table of Contents
