Transparency Print Quality Is Poor; Uneven Print Density; Vertical Banding - Lexmark X792 7562-4xx Service Manualv

Transparency print quality is poor

Try one or more of the following:
•
CHECK THE TRANSPARENCIES
Use only transparencies that meet the printer specifications.
•
CHECK THE PAPER TYPE SETTINGS
Make sure the paper type settings match the paper loaded in the tray or feeder:
1.
From the operator panel Paper menu, check the Paper Type setting.
2.
Before sending the print job, specify the correct paper type setting:
•
For Windows users, specify the paper type from Print Properties.
•
For Macintosh users, specify the paper type from the Print dialog.

Uneven print density

ABCDE
ABCDE
ABCDE
•
MAKE SURE THERE IS NO DEFECTIVE OR WORN PRINT CARTRIDGE.
Replace the print cartridge.

Vertical banding

Leading edge
Trailing edge
Replace the print cartridge.
7562
2-51
Diagnostic information
Previous
Next
Go Back