Finisher Or Stacker Sensor (Tamper Hp Left And Right) Removal - Lexmark X792 7562-4xx Service Manualv

7562

Finisher or stacker sensor (tamper HP left and right) removal

See "Finisher/High-capacity output stacker assembly (continued)" on page 7-39
1.
Remove the option from the printer.
2.
Remove the option top cover. See
3.
Disconnect the cable from the sensor.
4.
Pinch the tabs (A) to remove the sensors.
4-354
Service Manual
"Finisher or stacker top cover removal" on page
for the part number.
4-359.
Previous
Next
Go Back