Htu Exit Roller Removal; Htu Front Redrive Cover Removal - Lexmark X792 7562-4xx Service Manualv

HTU exit roller removal

1.
Remove the upper exit shaft. See
2.
Unsnap the left side of the roller from the cover and remove the roller.

HTU front redrive cover removal

1.
Remove all output options from the printer.
2.
Lay the HTU on its back, and open the access door.
3.
Remove four screws (A), and remove the cover.
"HTU upper exit shaft removal" on page
7562
4-414.
4-373
Repair information
Previous
Next
Go Back