Finisher Or Stacker Feed Roller Removal - Lexmark X792 7562-4xx Service Manualv

7562

Finisher or stacker feed roller removal

See "Finisher /High-capacity output stacker assembly" on page 7-37
1.
Remove the option from the printer.
2.
Open the option left access door.
3.
Using a screwdriver, force the rear hinge (A) out of the slot by pushing the door to the front.
4.
Remove the screw (B) to remove the roller you are replacing.
4-336
Service Manual
for the part number.
Previous
Next
Go Back