24X Paper Jam - Lexmark X792 7562-4xx Service Manualv

7562
232.04
232.05,
232.07
232.08

24x paper jam

Paper jam in Tray 1:
1.
Open the left access door.
2.
Grasp the jammed paper on each side, and then gently pull it out.
3.
Close the door.
4.
From the operator panel, touch Continue, jam cleared.
Paper jam in the optional trays:
1.
Open the side door of the specified optional tray.
2.
Grasp the jammed paper on each side, and then gently pull it out.
3.
Close the side door.
4.
From the operator panel, touch Continue, jam cleared.
2-14
Service Manual
D2 sensor broke early.
Possible causes:
• Damaged D2 sensor
• Faulty fuser
• Faulty system board
D2 sensor never broke.
Possible causes:
• Damaged D2 sensor
• Faulty fuser
• Faulty system board
D2 sensor is never made.
The D2 sensor may not be functioning properly. Go
to "D1 and D2 sensor service check" on
page 2-170.
1. Check for anything in the paper path that might
cause the paper to jam.
2. If clearing the jam does not solve the problem,
go to "D1 and D2 sensor service check" on
page 2-170.
See "232.03" on page 2-13.
Previous
Next
Go Back