Xx-Black Cartridge Motor Error Service Check - Lexmark X792 7562-4xx Service Manualv

7562
141.xx—Black cartridge motor error service check
Step Questions / actions
1 Turn the printer off, open the system board
shield, and remove the RIP card shield.
Check the cable in the connector JKI1 for
proper connection to the system board.
Is the cable properly connected?
2 Check the cable for damage.
Is the cable damaged?
3 Measure the resistance across the fuse F10
on the system board.
Is the fuse blown?
2-88
Service Manual
Yes
Go to step 2.
Replace the BLDC K ITU
cable. See "EP drive
assembly removal" on
page 4-54.
Replace the system board.
See "System board
removal" on page 4-150.
No
Reseat the cable.
Go to step 3.
Go to step 4.
Previous
Next
Go Back