Blurred Or Fuzzy Print; Characters Have Jagged Or Uneven Edges; Clipped Images - Lexmark X792 7562-4xx Service Manualv

7562

Blurred or fuzzy print

Try one or more of the following:
•
CHECK THE EP DRIVE ASSEMBLY AND TRANSFER MODULE
Blurred or fuzzy print is usually caused by a problem in the EP drive assembly or in the transfer module.
Check the EP drive assembly and transfer module for correct operation.
•
CHECK PAPER FEEDING FROM EACH INPUT SOURCE
Blurred print can be caused by incorrect feeding from one of the input paper sources, paper trays, or
duplex paper path.
•
CHECK THE HIGH-VOLTAGE CONTACTS
Check the high voltage spring contacts to ensure they are not bent, corroded, or damaged. Replace as
necessary.

Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the
software program.

Clipped images

Try one or more of the following:
•
CHECK THE GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.
•
CHECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1.
From the operator panel Paper menu, check the Paper Size setting.
2.
Before sending the job to print, specify the correct size setting:
2-36
Service Manual
Previous
Next
Go Back