Table of Contents
Advertisement
7562
ADF solenoid assembly removal
See
"ADF feed and drive" on page 7-25
1.
Remove the ADF front cover. See
2.
Rotate the cam shaft lever until the pick roll position cam assembly spring can fit over the tab (A).
3.
Disconnect the solenoid cable (B).
4.
Remove the two screws (C).
5.
Remove the ADF solenoid assembly.
4-196
Service Manual
for the part number.
"ADF front cover removal" on page
4-170.
Previous
Next
Go Back
Advertisement
Table of Contents
