Table of Contents
Advertisement
13.
BIOS SETUPS
The PCI-934 uses the AWARD Setup program, a setup utility in EEPROM that is accessed
by pressing the DELETE key at the appropriate time during system boot. This utility is used
to set configuration data in CMOS RAM.
CAUTION
Before modifying CMOS setup parameters, insure that both the battery
and W5 battery jumper are installed. Otherwise use the option 'Save
CMOS in Flash' (BIOS Feature Setup screen).
To install the battery jumper, please refer to Section 11 - Setting
Jumpers.
To run the BIOS setup program incorporated in the ROM BIOS:
Turn on or reboot the system.
Hit the DELETE key before or when the message - "PRESS DEL TO ENTER SETUP"
appears near the bottom of the screen.
The main menu appears on the screen:
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
Esc
:
Quit
F10
:
Save & Exit Setup
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
↑ ↓ → ←
(Shift)F2
Time, Date, Hard Disk Type...
13-1
: EXIT WITHOUT SAVING
:
Change Color
Advertisement
Table of Contents
