Table of Contents
Advertisement
PCI-934 Technical Reference Manual
12.1.2 CRT DISPLAYS
The PCI-934 board supports VGA (16M colors), SVGA (16M colors), and XGA (64K
colors) standards, and 1280x1024 (256 colors) resolution mode display.
The CRT display connects directly to the standard D-SUB 15-pin male connector located at
the edge bracket of the board.
§
CRT only Display Mode
To setup your system for CRT display only configuration, set the CRT & LCD option
to "CRT Only" in the Standard CMOS Setup screen.
§
Flat Panel Only Display Mode
To setup your system for flat panel display only configuration, set the CRT & LCD
option to "LCD Only" in the Standard CMOS Setup screen.
§
Simultaneous Display Mode
CRT and flat panel displays may be used simultaneously when enabling this mode
using the BIOS setup program.
The only restriction when using this mode: both the CRT and the flat panel must be at
the same resolution (1024x768 max.).
To setup your system to use both flat panel and CRT displays, set the CRT & LCD
option to "Both" in the Standard CMOS Setup screen.
12-6
Advertisement
Table of Contents
