Table of Contents
Advertisement
F.
EMERGENCY PROCEDURES
Follow this procedure only in case of emergency such as a critical error during the boot
block flash BIOS update (when using UPGBIOS utility program or saving AWARD
parameters in flash) or if you meet one of the following symptoms at anytime.
F.1
SYMPTOMS
1. No POST code on a power up (when using a POST code card).
2. System stops at POST 41h (when using a POST code card; see tables in previous
section), associated beep code is generated and the system tries to read from the
floppy drive.
3. Board does not boot.
F-1
Advertisement
Table of Contents
