Table of Contents
Advertisement
PCI-934 Technical Reference Manual
SYSTEM MEMORY
Four vertical 72-pin SIMM sockets support both FPM and EDO DRAM memory
configurations from 8 to 512MB.
Uses standard 5V, 70ns/60ns single-sided or double-sided 72-pin SIMMs.
Supports 1, 2, 4, 8, 16, 32M – 32/36-bit modules.
STORAGE DEVICES
Optional Flash Disk: when using the T069 daughter board, a standard CompactFlash ™
flash disk can be connected. Contact TEKNOR for available capacity.
Enhanced IDE interface: Enhanced IDE controller can drive up to four IDE devices with
transfer rates up to 22MB/s. The PCI-934 includes two separate IDE data bus and
control signals.
ETHERNET
100Base-TX or 10Base-T interface is implemented with Intel's 82558 Ethernet
Controller. The IC resides on the PCI bus, which allows very high transfer rates to and
from the DRAM.
BUS SUPPORT
ISA Bus (IEEE P966 Specification). High-drive buffers let the PCI-934 drive up to 20
slots.
PCI Local Bus Specification, Revision 2.1.
2-2
Advertisement
Table of Contents
