Table of Contents
Advertisement
§
BIOS File
The BIOS files are self-extracting files (VXX_XXX.EXE), each including two files:
the flat panel BIOS file (VXX_XXX.BFP) and a DOS text file (VXX_XXX.DOC) for
the BIOS update utility program.
The letters which form the BIOS name are made up of the following parts:
V
Video
BIOS
Once you have the correct video BIOS file, you need to copy the video BIOS file to
your board's Flash BIOS device. This is done with the BIOS update utility program;
see Section 14 to learn how to perform a video BIOS file update with this TEKNOR
utility.
§
Technical Information File
The related technical information file, which includes the interconnection chart, is a
PDF (Portable Document Format) file. The name of this file identifies the Flat Panel
and the TEKNOR board with its video controller.
Note:
The column labeled EXTERNAL in the Display Interconnection table of the PDF file
refers to the external circuitry or supplies which are needed in certain cases. This is
usually an external power supply or an inverter frequently used in the clock circuit
"SHFCLK" (in the case of V
sheet for the actual voltage). An inverter is shown as
circuits are shown in this column, connections are direct.
Exploring the Multimedia Capabilities of the Board
XX
_
Video
Controller
and V
, consult the manufacturer's flat panel data
LCD
ADJ
12-5
XX
X
Version
Revision
. When no special
Advertisement
Table of Contents
