3. Remove the screw 2 .
4. Gently pull off the board 1 .
Removing the diskette/CDROM drive
To remove the LED board:
1. Remove the cover.
2. Disconnect the cable.
3. Remove the screw 1 .
4. Carefully pull out drive 2 to remove.
Removing the LED board
To remove the LED board:
1. Remove the cover.
2. Disconnect the LED board cable from the system board .
3. Remove the two screws 2 .
4. Carefully slide out the board 1 .
122
IBM NAS 300 Service Guide
1
Screw
2
12.7MM Diskette/CDROM Drive
1
LED board
2
Screws(2)