Appendix E. Signal Cable Placement - IBM TotalStorage 300 Service Manual

Appendix E. Signal Cable Placement

This appendix describes how to connect the fiber-optic signal cables between the
RAID storage controllers and the Fibre Channel hub and any installed storage units.
Each IBM NAS 300 contains standard with a single RAID storage controller
(referred to as RAID storage controller # 1). This RAID storage controller comes
standard with 10 hard disk drives. For additional storage you can add up to four
storage units; each storage unit containing 10 hard disk drives. For more storage
you can add a second RAID storage controller (referred to as RAID storage
controller # 2) and then connect up to three additional storage units to this second
RAID storage controller.
© Copyright IBM Corp. 2001
135