Drive Fault Led; Sbb I/O Module Leds - IBM 5147-084 Installation And User Manual

Figure 25. Drive Fault LED

SBB I/O Module LEDs

The following figure shows the LEDs on the 6 Gb/s SAS EBOD SBB I/O module.
Figure 26. SBB I/O module LEDs
Table 6. 6Gb/s SAS EBOD I/O Module LED Descriptions
LED
I/O Module OK
I/O Module Fault
External Host Port Activity
34
Installation and User Guide - Model 084
Description
Constant green if the I/O module is operating correctly. Flashing green indicates
an I/O module VPD error.
Constant amber if the I/O module is faulty. For replacement procedure see
"Replacing an SBB I/O module" on page 46.
Constant green indicates that there is a host port connection but no activity.
Flashing green indicates that there is a host port connection, and data is being
transferred.