Appendix A. Fru Information (Service Only); Removing The Led Cover; Removing The On/Off Reset Board - IBM TotalStorage 300 Service Manual

Appendix A. FRU information (service only)

Field Replacement Units (FRUs) for the xSeries 340 should be replaced by qualified
service personnel only.

Removing the LED cover

To remove the LED cover, do the following:
1. Remove the cover.
2. From the back of the cover, release the four tabs 1 and gently pry away the

Removing the on/off reset board

To remove the on/off reset board:
1. Remove the cover.
2. Disconnect the cables from the system board.
© Copyright IBM Corp. 2001
1
Front LED cover
2
Tabs
LED cover 2 .
1
On/Off Reset Board
2
Screw
121