Eight-Bay Sff Drive Cage Option - HP ProLiant ML350 Gen9 User Manual

Close the PCIe retainer latch.
17.
Install the fan cage (on page 37).
18.
Install the air baffle (on page 34).
19.
Install the access panel (on page 32).
20.
Do one of the following:
21.
If the server is in a tower configuration, return the server to an upright position.
o
If the server is in a rack configuration, slide the server into the rack.
o
Connect each power cord to the server.
22.
Connect each power cord to the power source.
23.
Power up the server (on page 29).
24.
Do one of the following:
25.
For tower models, install the tower bezel (on page 31).
o
For rack models, install the security bezel
o

Eight-bay SFF drive cage option

Install additional SFF drive cages option in this order: box 5, 4, 3, 2, and 1. For more information on drive
and box numbering, see "Device numbering (on page 20)."
To install an additional eight-bay SFF drive cage, an optional storage controller is required. To obtain the
option, contact an HP authorized reseller.
To install the component:
Do one of the following:
1.
For tower models, open and remove the tower bezel
o
For rack models, if installed, remove the security bezel
o
page 30).
Power down the server (on page 29).
2.
Remove all power:
3.
("Security bezel option" on page 48).
("Remove the tower
("Remove the security bezel
Hardware options installation 106
bezel" on page 30).
(optional)" on