Eight-Bay Sff Drive Cage Option - HP ProLiant ML350 G6 User Manual

Eight-bay SFF drive cage option

Before installing the optional SFF hard drive cage, you must install an optional SAS controller. See the
instructions that ship with the option.
CAUTION:
components in HP ProLiant ML350 G6 Servers. For supported options, see the QuickSpecs at the
HP website (http://www.hp.com/servers/proliantml350).
To install the component:
Install the power cable
1.
Remove the two bezel blanks closest to the primary hard drive cage.
2.
Using a T-15 Torx screwdriver, remove the sleeve from the optional hard drive cage.
3.
Connect the SAS cables to the optional hard drive cage.
4.
Thread the SAS cables through the optional drive cage bay.
5.
To avoid damage to the pin connectors, install only supported hard drive cages and
("Installing a hard drive expansion cage power cable" on page 54).
Hardware options installation 57