Install the tower bezel
Insert the bezel.
1.
Close the bezel.
2.
Using the key provided with the server, lock the bezel with a counterclockwise turn.
3.
Remove the access panel
WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
To remove the component:
Do one of the following:
1.
For tower models, open and remove the tower bezel
o
For rack models, if installed, remove the security bezel
o
page 30).
Power down the server (on page 29).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
Do not operate the server for long periods with the access panel open or removed.
("Remove the tower
bezel" on page 30).
("Remove the security bezel
(optional)" on
Operations 31