HP ProLiant ML350 Gen9 User Manual page 61

Connect the Mini-SAS cables from the drive backplane to the HP Flexible Smart Array Controller.
11.
SFF configuration
o
LFF configuration
o
Install the screws and cable clips on the system board.
12.
Install the fan cage (on page 37).
13.
Install the air baffle (on page 34).
14.
Install the access panel (on page 32).
15.
Do one of the following:
16.
If the server is in a tower configuration, return the server to an upright position.
o
If the server is in a rack configuration, slide the server into the rack.
o
Connect each power cord to the server.
17.
Connect each power cord to the power source.
18.
Hardware options installation 61