Eight-Bay Sff Drive Cage Option - HP proliant ml350 gen9 User Manual

For rack models, if removed, install the security bezel (on page 54).
o

Eight-bay SFF drive cage option

Install additional SFF drive cages option in this order: box 5, 4, 3, 2, and 1. For more information on drive
and box numbering, refer to Device numbering (on page 19).
To install an additional eight-bay SFF drive cage, an optional storage controller is required. To obtain the
option, contact an HP authorized reseller.
If the server is in a tower configuration, do the following:
1.
Unlock and remove the tower bezel.
a.
Place the server on its side.
b.
Power down the server (on page 23).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the access panel (on page 24).
4.
Remove the fan cage (on page 29).
5.
Remove the cage blank
6.
Install the SFF drive cage.
7.
("Remove a component drive cage blank" on page 31).
Hardware options installation 91