Powering On And Selecting Boot Options In Uefi Boot Mode; Registering The Server - HP ProLiant ML350 Gen9 User Manual

the server for the first time, unless any installed software or components require an older version. For more
information, see "Keeping the system current (on page 142)."
For more information on using these installation methods, see the HP website (http://www.hp.com/go/ilo).
Powering on and selecting boot options in UEFI Boot
Mode
On servers operating in UEFI Boot Mode, the boot controller and boot order are set automatically.
Press the Power On/Standby button.
1.
During the initial boot:
2.
To modify the server configuration ROM default settings, press the F9 key in the HP ProLiant POST
o
screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the
English language.
If you do not need to modify the server configuration and are ready to install the system software,
o
press the F10 key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the HP website
(http://www.hp.com/go/ProLiantUEFI/docs).

Registering the server

To experience quicker service and more efficient support, register the product at the HP Product Registration
website (http://register.hp.com).
Setup 47