Remove the fan blank from fan bay 1.
15.
Install the fan in fan bay 1, making sure that the fan clicks into place.
16.
Install the access panel (on page 32).
17.
Do one of the following:
18.
If the server is in a tower configuration, return the server to an upright position.
o
If the server is in a rack configuration, slide the server into the rack.
o
Connect each power cord to the server.
19.
Connect each power cord to the power source.
20.
Power up the server (on page 29).
21.
Do one of the following:
22.
For tower models, install the tower bezel (on page 31).
o
For rack models, install the security bezel
o
("Security bezel
option" on page 48).
Hardware options installation 85