Roundshot VR Drive Instruction Manual page 89

4.1 Editing in "quality", "speed" + "turntable" mode (continued)
angle mode
cylindrical
angle mode
cylindrical spherical
manual visual
change angle
By changing this value
you will overwrite the
rows. Continue anyway?
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
Click on "angle mode" to change the way the rows (elevation,
number of images) are calculated.
The options are:
• cylindrical
• spherical
• Manual
• Visual
Changing the angle mode will lead to an automatic recalculation of
rows (elevation/images) for the program.
Choose the new "angle mode" by clicking on the button.
The following angle mode modifications are possible:
• from cylindrical to spherical (computes a sphere)
• from spherical to cylindrical (computes one row with vertical FOV
of chosen lens)
• from cylindrical to manual (requires manual programming of
rows)
• from spherical to manual (requires manual programming of rows)
The transition from manual to cylindrical or spherical is not
possible.
Continue with "OK" or cancel with "X".
In angle mode "cylindrical" and "spherical" the existing rows will be
overwritten. In angle mode "manual" the change of camera has no
consequences. Here the rows must be edited manually.
page 88