Program Editing; Editing In "Quality", "Speed" And "Turntable" Mode - Roundshot VR Drive Instruction Manual

4. Program Editing

4.1 Editing in "quality", "speed" + "turntable" mode
Click on the "program info" section to open the "program edit" menu.
In this menu all program parameters can be changed. It also allows to access the VR Drive settings.
All program parameters can be accessed and modified one by one.
mode
quality
mode
quality speed
video
turntable
HDR
The "Turntable" mode is an entirely different application. The number of images are not
calculated and therefore this mode has different variables. The same is true for the "Video"
and "HDR" mode.
This is why it is not possible to switch to "Turntable", "Video" or "HDR" mode from "Quality"
mode.
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
Edit P1 / page 1
mode
info
quality
focal length
Nikon
24 mm
D3
A/B value angle mode
0/0mm cylindrical
X
Y
360°
73°
Click on "mode" to change the VR Drive mode.
It is possible to switch from "Quality" to "Speed" mode and
vice-versa.
Changing to "Speed" mode does not change the calculation of
rows (elevation and images) or any other program parameters.
The only difference is that the following parameters will no
longer be accessible in "speed" mode and will therefore be
deactivated:
• Manual image release
• Bracketing
Edit P1 / page 2
overlap cam orientation
30% portrait
sequence
rows
zig.-zag
speed release time
6s 0.1s
pause
repeat
0/0s
• Pause before / after image taking
• Acceleration
• Mirror prerelease
Edit P1 / page 3
timer acceleration
0s 100%
bracketing manual
1 off
mirror rel.
orientation
0s CCW
lenstype
settings
no-fisheye
page 85