Roundshot VR Drive Instruction Manual page 85

3.7 Program management (continued)
copy
move
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
The "copy" command duplicates the currently active program.
P7
speed
H
Nikon D3
focal length : 24 mm
A: 1mm B: 1mm
angle X: 360° Y: 73°
rows : 1
°/10
R 1
sequence : zig-zag top dow
timer : 0s
speed X: 6s
This function is helpful when a new program needs to be created that is
very similar to an existing one. After copying the program, simply edit
the relevant parameters in the "program edit" menu.
The "move" command changes the sequence of programs by moving
the currently active program to a new position.
For example, when "P8" is selected and when clicking on "move", the
program will ask for the new program ID:
id
7
[ ]
1..8
P8
speed
H
Nikon D3
focal length : 24 mm
A: 1mm B: 1mm
angle X: 360° Y: 73°
rows : 1
°/10
R 1
sequence : zig-zag top dow
timer : 0s
speed X: 6s
After entering the new program number – in
this example "7" – all subsequent programs
will have a number increased by one, so the
previous "P7" will now become "P8".
page 84