Starting/Stopping The Vr Drive - Roundshot VR Drive Instruction Manual

3.6

Starting/stopping the VR Drive

In the "Home" menu click on "start" to launch your first VR Drive image sequence:
The VR Drive will start executing the active program – in this example "P1" in "quality mode".
In this example it will rotate 360° horizontally to take 10 images spaced at exactly 36°.
The VR Drive stops and releases the camera in every position.
P2 quality
Nikon D3
Row: 1
Angle X: 48.0°
Angle Y: 0.0°
Total images: 15
Current image: 2
Repeat: 0
Timer: 0
P2 quality
Nikon D3
Row: 1
Angle X: 48.0°
Angle Y: 0.0°
Total images: 15
Current image: 2
Repeat: 0
Timer: 0
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
While the VR Drive is running, the touch screen display shows
the progress of image taking:
• Row
• Angle X
• Angle Y
• Total images released
• Current image
• Number of times the program was repeated
• Timer
Stop the program any time by pressing the "stop" button.
The VR Drive will return to its initial position and the software
displays the "home" menu with the currently active program.
Pause the program any time by pressing the "pause" button.
The VR Drive will pause at its current position.
Once the program is paused, it is possible to
• Completely stop the image sequence by pressing "stop"
• Resuming the image sequence by pressing "start"
• Returning to any image and by pressing "back" and resuming by
pressing "play"
page 82