4.4.1 Settings/general (continued)
has y motor
yes
has y motor
no
remote radio
off
remote radio
on
warning
The battery will
discharge faster when
using this option.
Continue anyway?
software
software
version
key
ip
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
Click on "has y motor" to activate / deactivate the y-motor.
For VR Drive "full" select "yes".
For VR Drive "semi" select "no".
Click on "wake on radio" to activate / deactivate the wake-up
function of the radio release unit for the VR Drive remote control.
Deactivate the wake on radio with "no".
Activate the wake on radio with "yes".
With the radio receiver deactivated it is possible to turn the VR
Drive left/right/up/down and to start it. However, it is not possible
to turn it on. This can only be done with "wake on radio" set to
"yes".
As the battery discharges faster with the radio receiver activated,
the VR Drive displays a warning message.
Confirm with "OK" or cancel with "X".
Click on "software" to display information on the software
This function consists of
• key
• version
• IP
page 107
Need help?
Do you have a question about the VR Drive and is the answer not in the manual?