Roundshot VR Drive Instruction Manual page 31

2.4 Navigation (continued)
P1
quality
cam orientation : portrait
release time : 0.3s
pause before : 0.0s
pause after : 0.0s
repeat: 0
acceleration : 50%
mirror rel. : 0.0s
orientation: CCW
x/y position
X Y
° °
0.0 0.0
edit
delete
[-999.9..999.9]
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
P1
new delete
new delete
copy copy move
move
P1 quality
x/y position
Clicking the "active program + program
management" button opens the "program
management" menu.
In this menu new programs can be created
with the "Program Wizard", existing
programs can be deleted, copied or moved
into a different position.
More details about this menu are given in
section "Program management".
Return to the "home menu" by clicking "X"
(cancel).
The centre section of the "home menu" shows
the first part of the program details. Click on
the "program expand" button to display the
second part of the program details.
Only the program details relevant to a specific
mode are displayed. For example, in "speed"
mode pause before/after, bracketing and
mirror prerelease details are left empty.
Move back up to the "home menu" with the
"program collapse" button (arrow up).
"x/y position" sets the starting or "zero"
position for the VR Drive.
"X" sets the angle in horizontal, "Y" the angle
in vertical direction.
For example, for image sequences which
always start with the sky (zenith) shot, it is
possible to define the starting position as X= 0°
and Y=90°.
page 30