Roundshot VR Drive Instruction Manual page 71

3.4 Program Wizard "video mode" (continued)
Select "timelapse" to set up a program to release images for timelapse movies.
timelapse
image release mode
elev.
images

0
7
seconds angle
[-90..90]
[1..9999]
X
°
0.0
edit
delete
[-999.9..999.9]
speed
30
[8..9999]
For every acquired point indicate the following:
• Speed – time (in seconds) from this point to the next
• Pause – time (in seconds) for this point
• Acceleration – degree of speed adaptation from this point to the next (1% slow, 100% fast)
• One image every ... degree - number of images to be released within the x/y movement
Confirm every choice with "next".
Then continue to acquire as many points as the video sweep requires.
When the point acquisition is finished, confirm with "next".
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
There are two options to define the rhythm of image release for
every x/y movement:
"seconds" – releases one image every ... seconds
"angle" – releases one image every ... degrees
Y
°
0.0
edit
delete
[-999.9..999.9]
pause
1
[0.1...3600.0]
As a next step the VR Drive will move to
X/Y points.
Move the VR Drive with the cursor
buttons right/left/up/down. The exact
X/Y position is indicated in degrees.
Confirm a point with "OK".
acceleration
50
[0.1..3600.0]
One image every ... degrees
1
[1..9999]
page 70