Roundshot VR Drive Instruction Manual page 110

4.4.1 Settings/general (continued)
hardware id
hardware id
BC7893A8FF03FA7
off in
parkposition
X
Y
°
°
0
-90
[-999.9..999.9]
[-90.0..90.0]
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
Click on "hardware ID" to display the unique hardware
identification number of your VR Drive.
This ID is at the same time the serial number and is stored in the
"Club VR Drive" database.
Together with the software key this hardware ID activates the VR
Drive software mode.
The hardware ID cannot be modified.
Confirm with "OK".
Click on "off in park position" to set the preferences for the VR
Drive parking position.
Enter the desired parking position horizontally ("X") and vertically
("Y").
For example, to tilt the camera 90° down (for transport), enter:
• X: 0° (or any value)
• Y: -90°
Confirm with "OK" or cancel with "X".
page 109