Roundshot VR Drive Instruction Manual page 15

2.1.1 Roundshot VR Drive "full" (continued)
Attach your digital camera to the
nodal rail using the allen key.
Check that the rear of the camera is mounted straight at exactly 90° with the nodal rail:
wrong
Instruction Manual Roundshot VR Drive version 2.03 – April 2012 – © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
Make sure that the camera is always attached at
the same position. We recommend sliding the
camera to the very rear (zero position). When
attaching the camera at different positions the
nodal points in the software will no longer be
correct.
If the nodal rail is not long enough (or longer
lenses) use a separate, longer nodal rail
(available on request).
correct
page 14