Paper jams at tri-fold output tray 2d and lever 2g
1
Make sure that the machine has
stopped, and then open the right
cover on the light finisher.
2
Pull out the tri-fold output tray [2d],
swing lever [2g], and remove the
jammed paper.
Note
3
Return lever [2g] to the original
position and push back the tri-fold
output tray [2d].
4
Close the Finisher right cover.
Note
Paper jams at unit 4 and Knob4a
1
Make sure that the machine has
stopped, and then open the right
cover on the light finisher.
• If paper is torn, check for any
torn pieces of paper inside the
machine.
• A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.
Paper Jams
6
91