Fuji Xerox DocuCentre 9000 Quick Reference Manual page 20

2 Product Overview
7
Select [8. Auto Power Saver], and
select [Change Settings].
8
Using [
saver mode migration time from 1
to 240 minutes, in 1 minute
increments.
2
From Last Selection to Low Power Mode
Set the time to move to the [Low Power Mode] after the last operation.
Note
From Last Selection to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note
9
Press [Save].
10
Select [Close] repeatedly until the [System Settings/Registration] screen is displayed.
11
Select [Exit] to exit the System Administration mode.
18
] [ ], configure a power
• The default for [From Last Selection to Low Power Mode] is [15] minutes.
• The default for [From Last Selection to Sleep Mode] is [60] minutes. Configure the [From
Last Selection to Sleep Mode] time to be longer than the [From Last Selection to Low Power
Mode] time.