Paper Jams At Output Area Of Finisher - Fuji Xerox DocuCentre 9000 Quick Reference Manual

6 Problem Solving
2
Pull out unit 4.
3
Turn knob [4a] to the left to remove
all the jammed paper from the left
side of the unit 4.
Note
4
Return unit 4 to the original position.
5
Close the Finisher right cover.
Note

Paper Jams at Output Area of Finisher

This section describes how to remedy paper jams that occur at the following locations:
Following are place to refer.
6
Note
Paper jams at output tray
1
Remove jammed paper from the
output tray.
Note
2
Close and open the right cover of the finisher.
Note
92
• If paper is torn, check for any
torn pieces of paper inside the
machine.
• A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.
Paper jams at output tray.............................................................................................................92
Paper jams at finisher tray...........................................................................................................93
Paper jams at booklet output tray................................................................................................93
• Remedy differs according to the paper jam location. Follow the instructions displayed and
remove the jammed paper.
• If paper is torn, check for any
torn pieces of paper inside the
machine.
• A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.