Fuji Xerox DocuCentre 9000 Quick Reference Manual page 36

3 Basic Operation
1
Remove any paper clips and
staples before loading documents.
2
Adjust the movable document
guides to just touch the edge of the
document.
Note
3
Set the document facing up (side 1
for 2 sided document) in the
document feerder.
Note
When placing the document in the
DADF, you can set timing for lifting
up the document feeder tray.
3
Document Glass
The document glass accepts single-sheet or book form documents of sizes up to 297
× 432mm (A3, 11 × 17 inches).
The document glass can auto-detect only documents of standard sizes. For documents
that of not of a standard size, input the size in the [Scan Size] field.
Do not apply excessive force to hold thick document on the platen glass. It may break
the glass and cause injuries.
1
Open the document cover.
2
Place the document face down,
and align it against the inside left
corner of the document glass.
3
Close the document cover.
34
• When loading a large
document, such as A3, open
the document stopper
rightward.
• The <Confirmation> indicator
lights up when the document
is loaded correctly.
Caution