Solving Curled Output - Fuji Xerox DocuCentre 9000 Quick Reference Manual
Hide thumbs
Also See for DocuCentre 9000:
- User manual (624 pages) ,
- Network administrator's manual (132 pages)
Table of Contents
Advertisement
6 Problem Solving
Solving Curled Output
You can correct the curling of the output by pressing the De-curl button.
The De-curl button functions both in suspension and in operation if the power of the
machine is on.
Note
1
Check how the output copy is
curled.
2
Check that De-curl lights up.
Note
3
Press De-curl.
6
Note
For more information, refer to "Mode and function of De-curl button" (P.105).
104
• To change the curling correction mode while the machine is in operation, press the De-curl
button and then the change will be applied immediately.
• Pressing the Reset button on the control panel cannot change the curling correction mode.
• When turning on the power of
this machine, the de-curl
mode is set to Auto.
• When you cancel the Power
Saver Mode, the de-curl mode
will be set to Auto.
• Pressing the De-curl button toggles the mode between Auto, ON, and OFF.
Advertisement
Table of Contents
