Fuji Xerox DocuCentre 9000 Quick Reference Manual page 102

6 Problem Solving
Document jams at output area
1
Open the document cover.
2
Open the belt area while gripping
the lever, and remove the jammed
document.
3
Gently return the belt area to the
original position.
6
4
Put the DADF back in place.
5
Make sure that the document is not torn, wrinkled or folded, and load the document
again following the instructions displayed on the display.
Note
100
• Torn, wrinkled or folded documents may cause document jams and damage. To scan such
documents, directly place the document on the document glass to make copies.