Fuji Xerox DocuCentre 9000 Quick Reference Manual page 56

4 Paper and Other Media
Loading tab paper in tray 5 (bypass)
1
Open tray 5 (bypass).
Note
2
Hold the center of the paper guides
and slide them to the desired paper
size.
3
Place the paper with the side to be
copied or printed facing up, align
the tab positions to left, and place
4
the bottom side to be fed first. Insert
the paper slowly to the end along
the paper guide.
Loading Paper in Tray 8 (Interposer).
1
Hold the center of the paper guides
and slide them to the desired paper
size.
2
If the paper in already printed on,
load the paper with the printed side
facing up and with the tab side to be
fed first.
Important • Do not load paper exceeding
54
• If necessary, extend the
extension flap.The extension
flap can be extended in two
stages.When pulling out the
extension flap, do it gently.
the maximum fill line (MAX in
the figure). It may cause paper
jams or machine malfunctions.