Usb Connection - NETGEAR CVG834G Reference Manual

4. If you have VoIP service, connect the phone to Voice Port 1. If your service includes a second
line, you can connect that phone to Voice Port 2.
5. Verify the following:
• The power light
• The cable link light
network.
• If you connected VoIP lines, the Voice port lights

USB Connection

Note: The USB connection option is only available for Windows PCs. Also, Windows 95
does not support USB without special operating system upgrades and patches.
To connect a computer to the USB port on the gateway:
1. You must install the USB driver. Insert your NETGEAR CD into the CD drive of your
computer.
a. Connect the USB cable to your gateway and plug in the AC power for the gateway.
b. Use the USB cable to connect your computer to the gateway.
c. The Found New Hardware Windows installation wizard prompts for the drivers.
d. Browse to the NETGEAR CD and install the USB driver by clicking through the
Windows wizard prompts.
Figure 1-3
Installing the Gateway
Wireless Cable Voice Gateway Model CVG834G Reference Manual
is lit.
is solid green, indicating a link has been established to the cable
v2.0, November 2007
blink.
1-5