Add Wireless Devices Or Computers To Your Network - NETGEAR CG3300CMR User Manual

Setup. Set up the Internet connection, wireless, guest network, WAN, and LAN.
•
Security. Block sites, block services, and set up email notifications.
•
Administration. View router status, logs, and event logs, back up and restore the
•
configuration file, and change the gateway password.
Advanced Setup. Configure advanced network features such as port forwarding, port
•
triggering, Dynamic DNS, UPnP, and IPv6.
Home tab. Return to the Basic Home screen. See
•
For more information about the Advanced settings, see

Add Wireless Devices or Computers to Your Network

See
Guest Networks

To add wireless devices or computers to your network:
Open the software that manages your wireless connections on the wireless device
1.
(laptop computer, gaming device, iPhone) that you want to connect to your gateway.
This software scans for all wireless networks in your area.
Look for your network and select it. If you did not change the name of your network during
2.
the setup process, look for the default WiFi network name (SSID) and select it. The default
SSID is on the product label on the bottom of the gateway.
Enter the gateway password and click Connect. The default gateway passphrase is on the
3.
product label on the bottom of the gateway.
Repeat steps 1–3 to add other wireless devices.
4.
Wireless Cable Gateway CG3300CMR
on page 20 for instructions on how to set up a guest network.
Connect to the Gateway
Basic Home Screen
Chapter 3, genie Advanced
14
on page 12.
Home.