The Remote Controller Buttons In Guest Mode; Sensor/Relay Device Pinhole Allocation; Sa Series - Avermedia SA5104 User Manual

Name
(16)
(17)
(18)
2.1.3.1

The Remote Controller Buttons in Guest Mode

When user uses Guest account to operate DVR server, the front panel control buttons of DVR are limited to
preview and playback function only. The following table lists the control buttons that are available while in
Guest mode.
i
In the Guest mode, user only can use remote controller and front panel control buttons to operate DVR
server.
Name
+ ~
2.2

Sensor/Relay device pinhole allocation

2.2.1

SA series

The I/O card enables you to connect (4) sensor inputs and (4) relay outputs. Just connect the external
sensor and relay pin directly to the I/O card pinhole. Check the table below and locate which pinhole is
assigned to sensor input and relay output.
+ : To quick backup the recorded video file (See Chapter 4.6.2)
+ : To setup a A-B point video segment for playing(See Chapter
+ : To lock all buttons function of the panel and remote controller. To
To enable/ disable recorded video
To enable/ disable auto pan function
Function
Switch to playback mode, preview mode or E-map mode
To select the time and date of playback file
Press and function button to enable functions
+ :Switch to single screen display mode
+ : Switch to QUAD display mode
+ : Switch to 9 spilt screen display mode
+ : Switch to 16 spilt screen display mode
+ : Switch to one single and 7 spilt screen display mode
+ : Switch to one single and 12 spilt screen display mode
+ : To enable/ disable auto scan function
+ : To switch full screen display mode
+ : To freeze the live play video screen. User can snapshot the freeze
screen view while freezing. Press
Function
1.4.3.1)
unlock, press and user will be required to enter the
system password (default is admin/admin)
22
again to unfreeze.