Table of Contents
Advertisement
Chapter 4 Customizing the DVR System
In the Preview/Advanced screen mode, click
configuration setup selection appears, select and click the buttons you want to change the setting.
4.1 System Setting
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving,
and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour data,
the system automatically replaces the oldest data. In case you have more than one storage path, the system
automatically saves the data to the next storage path. You may also add additional network-attached storage
(NAS) for extremely high storage capacity. Select the Enable network storage check box to send the
recorded video in network-attached storage. To add network storage, the Internet storage drive/folder must
be mapped as Network Driver in DVR server. Enable network storage first, and then, click Add. In Browse
For Folder windows, select drive C and right click mouse button, select Map Network Drive option.
button to customize your DVR. When the DVR
44
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Advertisement
Table of Contents
