To Setup Remote Dvr Server; System Setting - Avermedia SA5104 User Manual

10.2.2 To Setup Remote DVR Server

Select the DVR server from listing and click Setup to configure remote DVR server.
10.2.2.1

System Setting

In the System Setting windows, click Update to accept the new settings, click Exit to exit without saving, and
click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(1) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data
after check box and enter the numbers of days in Days text box.
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days, enable the
Delete event and alarm log after check box and enter the numbers of days in Days text box.
(3) Video Standard
Change and select the proper video system according to your camera video system. If the video system
setting is wrong, the video would appear abnormal.
(4) Attention Please
Check the attentiveness of the person who is monitoring the system. You may set the number of times the
Attention dialog box to appear in a day in Times per day text box.
When this feature is enabled, the Attention dialog box would appear. The person who is monitoring the
system must enter the same number that appears from the left box at the right text box and then click OK.
(5) TV Out
Set the display time gap from 3 to 10 sec. before it switches to the next camera.
(6) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.
- Beep if no signal
Make sound when the video signal is lost.
- Mandatory Record
(10)
116
(6)
(7)
(8)
(9)